| Chemical Composition Limits | ||||||||||
| Weight % | Al | Zn | Mn | Si | Cu | Ca | Fe | Ni | Others | Mg |
| Magnesium AZ31B |
2.5 - 3.5 | 0.7 - 1.3 | 0.2 min | 0.05 max | 0.05 max | 0.04 max | 0.005 max | 0.005 max | 0.30 max total | bal |
AZ31B is a wrought magnesium alloy with good room-temperature strength and ductility combined with corrosion resistance and weldability. AZ31B finds application in wide variety of uses including aircraft fuselages, cell phone and laptop cases, speaker cones and concrete tools. AZ31B can be superformed at elevated temperatures to produce a wide variety of intricate components for automotive uses.
AZ31 is also available as tooling plate which is specially produced to provide a flat plate surface. The production process of AZ31-TP also results in plate with exceptional dimensional stability in machining. This allows for the manufacture of very complex parts but also components which benefit from the dimensional stability such as jigs, fixtures, optical benches, vibration test equipment and inspection gauges.
Typical Mechanical Properties| Material | Condition | Thickness " | Tensile Strength | Yield Strength 0.2 % | Elongation in 4D (%) |
| Magnesium Alloy AZ31B Sheet |
Cold Rolled, partially annealed | 0.016 - 0.249 | 39 | 29 | 6 |
| Magnesium Alloy AZ31B Sheet | Cold Rolled, partially annealed | 0.249 - 0.374 | 38 | 26 | 8 |
| Magnesium Alloy AZ31B Sheet | Cold Rolled, partially annealed | 0.374 - 0.500 | 37 | 24 | 8 |
| Magnesium Alloy AZ31B Sheet | Cold Rolled, partially annealed | 0.500 - 1.00 | 36 | 22 | 8 |
| Magnesium Alloy AZ31B Sheet | Cold Rolled, partially annealed | 1.00 - 2.00 | 34 | 20 | 8 |
| Magnesium Alloy AZ31B Sheet | Cold Rolled, partially annealed | 2.00 - 3.00 | 34 | 18 | 8 |
| Magnesium Alloy AZ31B Tooling Plate |
Tooling Plate | 35 | 19 | 10 | |
| Tooling Plate properties are typical only and are not guaranteed or reported. | |||||
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium AZ61A |
6.5 | 1.0 | 0.15 | - | - | - | - | 1.80 |
AZ61A (AZM) is a general purpose magnesium alloy which is both gas and arc weldable. AZ61A has a higher tensile strength and superior corrosion resistance compared to AZ31B and it is possible to perform various finishing on its surface.
Typical Mechanical Properties| Material | Diameter | Ultimate Tensile Strength | Yield Strength | Elongation |
| Magnesium Alloy AZ61A-F Round Bar |
≤0.25" |
46 | 33 | 17 |
| Magnesium Alloy AZ61A-F Round Bar | 0.25" - 2.5" | 45 | 33 | 16 |
| Magnesium Alloy AZ61A-F Round Bar | 2.5" - 5.0" | 45 | 31 | 15 |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium AZ80A |
8.50 | 0.50 | 0.15 | - | - | - | - | 1.80 |
AZ80 (AZ80A) is a high strength alloy for extrusions and for forgings of simple design
Typical Mechanical Properties| Material | Tensile Strength (MPa) | Yield Strength 0.2% (MPa) | Elongation 5.65 | Hardness VPN |
| Magnesium Alloy AZ80A Forgings Precipitation treated |
290 |
200 | 6 | 60 |
| Chemical Composition Limits | ||||||||||
| Weight % | Al | Zn | Mn | Be | Si | Cu | Ni | Fe | Other | Mg |
| Magnesium AZ92A |
8.3-9.7 | 1.7-2.3 | 0.15-0.50 | 0.0002-0.0008 | 0.05 max | 0.05 max | 0.005 max | 0.005 max | 0.3 max | Bal |
AZ80 (AZ80A) is a high strength alloy for extrusions and for forgings of simple design .
| Chemical Composition Limits | |||||
| Weight % | Rare Earth | Zn | Zr Total | Others Total | Mg |
| Magnesium Alloy EZ33A |
2.5 - 4.0 | 2.0 - 3 | 0.45 - 1.0 | 0.30 max | Bal |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium HK31A |
- | - | - | 0.45 - 1.0 | 2.45 - 4.0 | - | 0.30 | 1.79 |
| Material | Thickness " | Tensile Strength ksi | Yield Strength ksi | Elongation in 4D (%) |
| Magnesium Alloy HK31A - H24 |
0.125 - 0.25 | 34 | 24 | 4 |
| Magnesium Alloy HK31A - H24 | 0.25 - 1.0 | 34 | 25 | 4 |
| Magnesium Alloy HK31A - H24 | 1.0 - 3.0 | 33 | 25 | 4 |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium Alloy HM21A |
- | - | 0.45 - 1.1 | - | 1.5 - 2.5 | - | 0.30 | 1.77 |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium Alloy HM31A |
- | - | 1.2 min | - | 2.5 - 3.5 | - | 0.30 | 1.81 |
| Chemical Composition Limits | ||||||||
| Weight % | Zn | Rare Earth Total |
Zr total | Mn | Cu | N | Other | Mg |
| Magnesium Alloy ZE41 |
3.5 - 5.0 | 0.75 - 1.75 | 0.4 - 1.0 | 0.15 max | 0.10 max | 0.01 max | 0.30 max | Bal |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium Alloy ZK21A |
- | 2.0 - 2.6 | - | 0.45 - 0.80 | - | - | 0.30 | - |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium ZK60A |
- | 4.8 - 6.2 | - | 0.45 (min) | - | - | 0.30 | 1.83 |
| Material | Cross-Sectional area (sq in) | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation 4D |
| Magnesium Alloy ZK60A - T5 Bar |
< 5 |
45 | 36 | 4 |
| Magnesium Alloy ZK60A - T5 Bar | 5 - 25 | 45 | 34 | 6 |
| Magnesium Alloy ZK60A - T5 Bar | 25 - 40 | 43 | 31 | 6 |
| Chemical Composition Limits | ||||||||
| Weight % | Al | Zn | Mn | Zr | Th | Rare Earth | Other | Specific Gravity |
| Magnesium Alloy ZRE 1 |
- | 2.5 | - | 0.60 | - | 3.0 | - | |
Availability
Magnesium Alloy 2L126 is available in Sand Casting. For all stock and size availability contact Sales.
Specifications
BS 2L126 Castings
BS 2970
MAG6-TE
ZRE 1
EZ33A
